Setting up the gearing in the wd1.

Post Reply
User avatar
Merlin
Posts: 14
Joined: Mon Sep 09, 2013 1:30 am

Setting up the gearing in the wd1.

Post by Merlin » Sun Feb 23, 2014 3:24 am

Can some one please guide me step by step, crank - cam - mag and impulse how you set these out as I'm having trouble with my timing I think. Assume crank and Magneto gears are already out on the bench.... Thank you.
Engines don't leak, they mark their territory...

User avatar
Richard
Site Admin
Posts: 251
Joined: Mon Aug 10, 2009 6:47 am

Re: Setting up the gearing in the wd1.

Post by Richard » Sat Jun 21, 2014 10:06 am

Hi Merlin. Please refer to page 10 at http://www.wolseleystationaryengines.or ... manual.pdf.
Regards
Richard

Anton de wit
Posts: 2
Joined: Sun Dec 30, 2018 6:45 pm

Re: Setting up the gearing in the wd1.

Post by Anton de wit » Sun Dec 30, 2018 11:02 pm

Hello Knowledge masters of the WD 1 -8 engines, would someone be able to enlighten me of the reason that the WD1-8 engine i have has two punch marks on the magneto gear " on the magneto side of the gear, not visible from the cover plate side as indicated in the manual " were as in the Manuals for the engine , only one mark is discussed.
This unit was is model number 84561 and was distributed by VETSAK in South Africa somewhere around the 70,S ??? I think ,
greetings for the last days of 2018
regards
Attachments
IMG_2973.JPG
WD1-8
IMG_2973.JPG (132.28 KiB) Viewed 2039 times
IMG_2982.JPG
timing gear magneto
IMG_2982.JPG (161.39 KiB) Viewed 2039 times
IMG_2980.JPG
timing gear camshaft
IMG_2980.JPG (136.47 KiB) Viewed 2039 times

Post Reply