WD1 Timing

User avatar
Richard
Site Admin
Posts: 246
Joined: Mon Aug 10, 2009 6:47 am

WD1 Timing

Postby Richard » Mon Jun 13, 2011 3:39 am

The following topic was placed by pistonpete but was in the wrong category. In the process of moving it to the correct topic I accidentially deleted it (sorry pistonpete!!). If anyone can help him please post a reply:

hi does anyone have wd1 timing mark diagram . i have the diagram in the wolseley instruction manual for the wd9 and wlb9 , just want to see if wd1 timing is the same my email is parkermoore@ntlworld.com , would be very thankful for any info as cant seem to get wd1 running , loads of firing but sending piston backwards may have crank 180 out hence the need for timing marks thank you .pistonpete

Posts: 6
Joined: Wed Apr 27, 2011 3:50 am
Private messageE-mail pistonpete

Wizard8838
Posts: 238
Joined: Tue Sep 08, 2009 1:22 am

Re: WD1 Timing

Postby Wizard8838 » Mon Jun 13, 2011 8:02 pm

Email sent with timing pic

W

User avatar
Merlin
Posts: 14
Joined: Mon Sep 09, 2013 1:30 am

Re: WD1 Timing

Postby Merlin » Mon Sep 09, 2013 6:01 am

Hi I might have a similar issue the driven gear has a dot on it but the driver doesn't I'm guessing you have to have the cylinder TDC or something.... Any help please?

Merlin_3055@msn.com...
Engines don't leak, they mark their territory...

User avatar
Merlin
Posts: 14
Joined: Mon Sep 09, 2013 1:30 am

Re: WD1 Timing

Postby Merlin » Wed Sep 11, 2013 2:06 am

Might be looking at the gears from the wrong side. Wrong door :?
Engines don't leak, they mark their territory...

Nobelipt
Posts: 1
Joined: Thu Nov 28, 2013 4:56 am
Location: Slovakia
Contact:

Re: WD1 Timing

Postby Nobelipt » Thu Nov 28, 2013 6:09 pm

Извиняюсь, но это мне не совсем подходит. Кто еще, что может подсказать?

Cardog Привет!


Return to “WD (WD1)”

Who is online

Users browsing this forum: No registered users and 1 guest